Julian Lemmerich's Homenetwork wiki

Diese Seite ist nicht editierbar. Du kannst den Quelltext sehen, jedoch nicht verändern. Kontaktiere den Administrator, wenn du glaubst, dass hier ein Fehler vorliegt.

====== Setting up Software VLANs ======

This Tutorial is for Setting up Software VLANs on Windows Machines, that do not support Hardware VLANs.

I advise to use this only on static Cable connections.

==== Step 1 ====

Check if Windows Pro is installed with ''Win'' + ''R'' and executing the command

<code powershell>
winver
</code>

It should look say "Windows 10 Pro" in the bottom paragraph.

==== Step 2 ====

This step can be skipped first. If Step 3 doesnt work, come back to this and check it.

Check if Virtualization is enabled in BIOS.

Shut the PC down completely. When starting mash ''Enter'' or ''F1''

Enter BIOS, and look into the security Settings for "Intel Virtualization Technology" and enable the setting.

==== Step 3 ====

Open "Turn Windows-Features off or on" with ''Win'' + ''R'', executing the command

<code powershell>
optionalfeatures
</code>

Then scroll down to "Hyper-V" and extend it. You need to install both the //Hyper-V Management Tools// and //Hyper-V Platform//. If the //Hyper-V Platform// is greyed out, go back to Step 2.

After installing, the PC will restart.

==== Step 4 ====

Open "Hyper-V Manager".

Open the "Virtual Switch Manager" in the Action Panel.

Create a new Virtual Switch with the Type "External".

{{:knowledge_base:windows:screenshot_91_.png?600|}}

Name the Switch after your existing Network Adapter. For Type choose "External" and select the static Network connection you want to enable VLANs for. Enable the chekmark to share the Network Adapter with the Management System (which is your Computer).

Next check "Enable VLAN identification for the Management OS" and enter the VLAN you want to use in the Textfield.

==== Step 5 ====

Reboot the Computer to restart the Networking service.